Skip to content

Claims Updated on November 11, 2026

Report a claim on a vehicle

Report a claim, track its resolution and link it to the deposit settlement.

Reporting a claim keeps the damage history of a vehicle, tracks repairs, and reuses liability and estimated cost when settling the deposit.

Report a claim

From the Sinistres (claims) page, click Déclarer un sinistre (report a claim), or use the same action directly from the reservation concerned or from the Sinistres tab of the customer's record.

When the vehicle is not known yet, the report starts with the Véhicule (vehicle) step: choose the vehicle concerned in the list, then click Suivant (next). This step does not show when you report from a vehicle's or a reservation's record, nor when you edit the claim: the vehicle is already known, and the report fits on a single screen.

The Sinistre (claim) step gathers the rest:

  1. In the Dégâts (damage) block, touch the vehicle diagram where each damage is (see Noting damage).
  2. In the Sinistre group, enter the Date du sinistre (date, required) and, if you wish, the Description du sinistre (description): it is optional, one sentence is enough.
  3. State whether a Tiers impliqué (third party) is involved. If so, fill in the Détails du tiers (third-party details) and upload the accident report form (constat amiable, PDF or image): it is attached to the claim, as at check-out.
  4. Choose the Responsabilité (liability): customer, undetermined, or third party when a third party is involved. Enter the Coût estimé de la réparation (estimated repair cost) and add Photos du véhicule (vehicle photos).
  5. Leave Véhicule immobilisé (vehicle immobilized) on if the vehicle can no longer be rented. Turn it off for damage that does not prevent renting: the vehicle then stays available for rental.

The vehicle and the date are enough to save: the rest can be completed later with Modifier le sinistre (edit the claim).

At the vehicle's return, the claim is only created if you turn on Déclarer un sinistre (report a claim) in the Dégâts et signature (damage and signature) step: it then takes the accident report form if you uploaded it and the damage placed on the diagram. Without this switch, the damage noted stays on the return inspection, without creating a claim nor blocking the vehicle. Interrupting a reservation because of a claim also creates it. When reported from a reservation, the claim stays linked to it.

A claim reported at the return or at the interruption of a rental counts as immobilizing; you can change this with Modifier le sinistre (edit the claim). Claims recorded before this setting existed also count as immobilizing.

Track the resolution

Each claim has a status: À traiter (to handle), Traitement en cours (in progress), Traité (handled) or Clos (closed). The claim record gathers the description, third-party details, linked repairs, invoices and history.

At the top of the overview, the Origine du sinistre (claim origin) block tells how the record was created. Déclaré au retour du véhicule (reported at the vehicle's return) or Déclaré à l'interruption de la location (reported when the rental was interrupted): the sentence gives the reservation, the date and the team member who recorded the return, with a Voir l'état des lieux de retour (see the return inspection) link, or Voir l'état des lieux de l'interruption (see the interruption inspection), that opens the État des lieux (inspection) tab of the reservation, and a link to the reservation. Saisie manuelle (manual entry): the record was reported by hand, the sentence tells who entered it and when. Autoria records the origin when the record is created: it cannot be chosen nor edited. A record created before this tracking shows Origine non renseignée (origin not provided) when its origin could not be recovered. Right below, a notice tells whether the vehicle is blocked with no return date, under repair (with the planned end of the maintenance), not immobilized or available again. The left panel also shows Véhicule immobilisé (vehicle immobilized): Oui (yes) or Non (no). The Dégâts constatés (recorded damage) are shown on the vehicle diagram.

On a customer's record, the Sinistres tab lists the claims of that customer's reservations, newest first, with the vehicle, the reservation concerned, the date, the Responsabilité (liability) and the Statut (status). Claims on a reservation where they are only the second driver are listed too, marked Second conducteur (second driver). The tab's Déclarer un sinistre (report a claim) button lists the customer's reservations whose check-in is done: pick one and the form opens with the vehicle and the reservation already filled in.

A claim with Véhicule immobilisé (vehicle immobilized) makes the vehicle unavailable as long as no maintenance is linked to it and it is not closed. Schedule the repair in Maintenance, or use Clore le sinistre (close the claim) when there is nothing to repair in the app, to make the vehicle bookable again.

Close or reopen a claim

A claim can be closed without a maintenance, for instance when the vehicle was repaired elsewhere or there is nothing to repair. On the claim record, open the actions menu and choose Clore le sinistre (close the claim), then:

  1. Choose the Motif de clôture (closure reason, required): Réparé hors application (repaired outside the app), Pas de réparation (no repair) or Déclaré par erreur (reported by mistake).
  2. Add a Précision (detail) if needed: garage, amount, context.
  3. Click Clore le sinistre (close the claim).

The status turns to Clos (closed) and the vehicle is available for rental again at once. The overview shows the Clôture (closure): reason, date, author and detail. A claim whose linked maintenance is still in progress cannot be closed: complete the maintenance first.

To undo it, choose Rouvrir le sinistre (reopen the claim) in the same menu and enter the Motif de réouverture (reopening reason, required). The claim is open again: if it immobilizes the vehicle and no maintenance is linked to it, the vehicle is unavailable again at once. The overview then shows the Réouverture (reopening) with its date, author and reason, and the Historique (history) tab keeps track of every closure and reopening.

Only the Owner, an Administrator and a Manager can close or reopen a claim.

Withhold the cost from the deposit

When the claim is linked to a reservation, the Retenir la caution window shows liability, estimated cost and applicable excess. See Collect and refund a deposit.

support@autoria.tn